![]() Change your router’s network settings For more recent TP-Link router models If your router’s IP address was changed in the past, and you cannot remember it, you can find it in your device’s settings.ĭifferent TP-Link router models have their own dashboard interfaces, so refer to the section below that matches your router admin panel. To access your router admin panel, go to 192.168.0.1 in your web browser and log in with your username and password (by default, both are admin). Jump to…īlock IP addresses on your TP-Link routerĬheck if the IP addresses are blocked Block IP addresses on your TP-Link router Log in to your router admin panel To block IP addresses on your TP-Link router, you will need to set some special routing rules to ensure your network traffic will not flow through the IPs you specified. This guide will show you how to block IP addresses on TP-Link routers. Get to know more details of each function and configuration please go to Download Center to download the manual of your product.Certain streaming services will function more reliably if you block specific IP addresses on your router. Alternatively, any Wi-Fi device can now access the Internet through your TP-Link N router by using the SSID and Password set up in the above steps. All other LAN ports on your TP-Link N router will now grant devices Internet access. Use an Ethernet cable to connect the main router to your TP-Link N router through their LAN ports (any LAN ports may be used). Go to System Tools - > Reboot and select Reboot to reboot the device.ħ. Go to DHCP - > DHCP Settings and select Disable the DHCP Server. Note: If using a dual band router, repeat this process for the 5GHz band as well.ĥ. WPA/WPA2-Personal is recommended as the most secure option. Go to Wireless -> Wireless Security and configure the wireless security. Go to Wireless -> Wireless Settings and configure the SSID (Network name). Note: After changing the LAN IP address, a reboot will be required and you will need to log into the TP-Link N router with the new IP address.ģ. This IP address should be outside the main router’s DHCP range.Įxample: If your DHCP is 192.168.2.100 -192.168.2.199 then you can set the IP to 192.168.2.11 Go to Network -> LAN on the side menu and change the LAN IP address of your TP-Link N router to an IP address on the same segment of the main router. Log into the router’s web management page.Ģ. Enjoy! Connect to the wireless network by using the SSID (wireless name) and password of the router.ġ. ![]() Note: If you want to change the default SSID (network name) and the password, please follow Quick Setup to complete the configuration.Ħ. How to change to Access Point mode: Go to ( Advanced)-> Operation Mode or Advanced-> System Tools-> Operation Mode. After successfully login, select Access Point mode and follow the Quick Setup to complete the configuration. Go to Tools menu > Internet Options > Connections > LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it.ĥ. ![]() Note: If the above screen does not pop up when you use IE Web-browser, it means that your IE Web-browser has been set to a proxy. Use admin for password, and then click Login. ![]() Enter in the address bar of a web browser. Connect a computer to the router via an Ethernet cable or wirelessly by using the SSID (network name) and password printed on the bottom label of the router.Ĥ. Connect the router to your wired host router’s Ethernet port via an Ethernet cable as shown below.ģ. Connect the power adapter to the router and turn on the router.Ģ. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |